5.5inch H546UAN01.0 2160X3840 LCD Screen with H-D-MI To Mipi LCD Controller Board

5.5"H546UAN01.0 2160X3840 LCD Screen:
Display New Mode2, Normally Black, Transmissive
Resolution 2160RGB)×3840
Outline Size 69.84 ×128.86×1.38(H×V×D)
Display Area 68.04× 120.96 (H×V)
Brightness 500 cd/m² (Typ.)
Contrast Ratio 1000:1 (Typ.) (TM) 
Viewing Angle 70/70/70/70 (Typ.)(CR≥100) [Left / Right / Up / Down]
Signal Interface MIPI (2 ch, 4 data lanes) , 60 pins , Connector
Backlight  WLED
Input Voltage 1.85/1.35V (Typ.)

Packing list :
1× HD-MI To Mipi LCD Controller Board VS-HDMITMIPI-4K V2
1× 5.5inch H546UAN01.0 2160X3840 LCD Screen
1× Signal Cable
1× Converter Board

Instuction:
1. When H-DMI signal is not accept. It shows black Image and LED flashing on main board. Please change H-DMI source for test.
2. When H-DMI accept. It shows correct image and LED is blue.
This Board work with PC and Raspberry Pi. The image not support Scaling. It shows image depend on H-DMI input source.
Turn On：
a、Connect Converter Board With LCD Screen Interface
b、Connect Converter Board With 60Pin Cable
c、Connect Main Board With 60Pin Cable
d、Insert H-DMI Type Cable
e、Turn On 5Vdc or USB as Power Supply  
Turn Off：
a、Turn Off 5Vdc or Remove USB Power Adapter
b、Remove H-DMI Cable
c、Disconnect Main Board With 60Pin Cable
d、Disconnect Converter Board With 60Pin Cable
e、Disconnect 60Pin Cable With LCD Screen
For PC:
1. Most of MIPI screen for vertical display. Need to adjust computer graphics mode.
2. Replication Mode - Extended mode - Vertical and Horizontal adjustment.
For Raspberry Pi
1. The Main Board Four Locating Holes Compatible With Raspberry Pi.
2. Different Raspberry Pi are set differently. Please connect with Raspberry Pi Technical support.